After a 5 coats of clear epoxy it was time for varnish of the deck and sides. I have completed 4 coats of varnish and the amber tint has given a nice ivory color to the white stripes and toned them down a bit. Looks better I think. As stated on the varnish can (Epifanes), the first coat was thinned 50% with mineral spirits. I used a foam trim roller to put it on quickly and a wide foam brush to tip it off. The first couple of coats were sanded with 220, but I could see scratches, so I have now been using 320 and then 400 between coats. Thinning is about 25%. I have been rolling on half of the forward deck and then tipping off, then do the same on the other side. If there is any imperfection, I have learned to ignor it because there is no going back, it only makes an issue worse. I was hoping to be done after 4 coats, but there were a couple of dry/missed spots so Im on for at least 5. I hope to be done before the boating season is over.
