River Lark Timelapse

I did some timelapse recording while cruising about during our month aboard.  I used a GoPro camera in timelapse mode taking 1 x 5mega pixel shot every 2 seconds.  In this video the final edit there are 7515 shots. These are then reduced in size to 1024 x 768 which takes so long to do I set the PC to do this task overnight.  Also for the assembly software to compile the images they have to be consecutively numbered.  The software used to reduce the size and re-number is Infranview.

The next stage is to compile the stills into a movie.  For this I use VirtualDub  The result is this:-

 First cut

Theres still a bit more to do to this so check back for sound and titles.

I have now been told  3.5 mph over 3.5 hours = 12.25 miles travelled which is about right . To cover that distance in 2 minutes youd have to be doing 367.5mph (12.25 x 60/2)

Read More..

Down To The Finishing Off Jobs

Forgive me readers for I have sinned. Its been nearly a month since my last blog.  I am now just doing the last few little jobs that have been hanging around.

I had the final bit of skirting board made by DW Wood Mouldings and fitted them along with the final bits of plinth.

Same both sides

I have fitted the rear door vents.

 16g SS special order, nice and thick

Still need varnishing

I have fitted the front button.

Ready for some bumping now ;-)

And finally Ive fitted a warning LED to the dash to confirm the alternator parallelling is locked in.

A horrible job which I didnt photograph was the removal of a spill of 2.5L of tar paint in the chain locker.  I decided it would be better to let it dry then use a hot air gun to melt it into manageable slices.  It worked but took about an hour and the last bits in the corners was a real job.

I have decided to move the inverter inside under the rear stairs.  I have had a couple of comments about it and I was a little unsure if it was a good idea when I decided to put it in the engine room  I will probably do this next week.

Read More..